Hammerite REG500 500ml Radiator Paint - Gloss White

Product Information

You can use a standard paint brush, or it might be worth investing in an angled radiator brush to help you get into awkward gaps. What Paint to use for Your Radiator Top Coat?

You should wear a face mask and make sure the room is well-ventilated. Gloves are also advisable, as spray paint can drip from the nozzle onto your hands and is difficult to remove. Painting Your Radiator With Top Coat If this sounds too fiddly for you and you are worried you might mess it up, speak to a local painter and decorator who can help. Your fourth option is spray paint. There are a few spray paints specially formulated for radiators available, with a limited selection of colours.Limitations: Not suitable for use over chrome. Not suitable for use on towel rails. Not suitable for surfaces at temperature above 60°C. Use sandpaper to remove the paint and rust from the relevant spot, and expose the steel of the radiator itself. Take a look at the edges of the area that you are sanding down. Some areas of rust may be hidden under the existing paint, and there may be more than you think. Put down dust sheets underneath the radiator to prevent any paint dripping onto the floor, and mask off any nearby areas that you don’t want the paint to get on. See our masking up project for tips. Old or protective clothing is handy, just in case you slip, drip or accidentally brush against the radiator while you are painting. Since an angle grinder works automatically, it can save you time while working on the surface of your radiator. When dust-free, give the radiator a wipe down with a TSP solution (trisodium phosphate). This cleaning agent is a great degrease and helps to de-gloss the surface to prepare it for painting.

Easy to apply by brush, roller or electric sprayer, give your horizontal, vertical and column radiators an instant refresh with long-lasting coverage that’s non yellowing and resistant to mould. If spraying, paint should be diluted with water by 10-20% as required. Two coats are recommended If you’re the kind of person who a) doesn’t want to bother themselves with priming, and b) also has drying time in abundance, there’s a less labour-intensive route to radiator-painting perfection: Rust-Oleum’s Universal All Surface paint.

This problem is a classic case of “a stitch in time saves nine”. The best thing you can do is to stop the problem before it occurs. First of all, inspect radiators for signs of flaking or absent paint. Cheap radiators may show signs of poor workmanship – use a mirror to inspect the edges underneath, and paint over any signs of exposed steel. You will need a special radiator paint for this, and don’t paint over existing rust, as this will simply hide the problem without actually fixing it. Once ready to paint, apply as you would a top-coat, covering the sides and top before using overlapping strokes to work the primer across the face. Dry in 30 minutes, you can recoat in 60, or if you’re happy with your work and all stains are hidden, move straight to painting – radiator saved. Clean Up: Remove as much product as possible from application equipment before washing with water. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste paint. Clean your radiator first to remove any dust and grease that have built up over the years, then dry it and rub down lightly with fine sandpaper or wet and dry paper – this is to give a slightly roughened surface for the paint to adhere to.

Did you know that the standard finish of most radiators is just basic white primer, you are expected to paint the radiator anyway. They are in effect a blank canvas. But most people like the clean white lines, so inevitably just leave the radiators alone. Just a simple coat of paint, and your radiator will last a lot longer! Some cheaper radiators also tend to have questionable paint finishes, and there can be a lot of bare unprotected metal edges on show, so act now to save your radiators from future problems! Not only do rusty radiators look bad, they can also cause serious problems. Over time, the radiator will start to develop ‘pinhole’ leaks. Such leaks start off small and can be very difficult to accurately locate. You may not even notice them at first, but given enough time, the rusted area can disintegrate completely and cause a flood. How to prevent rusty radiators Choose from 100+ stunning colours to find the perfect complementary shade, ideal for painting your radiators to match your walls

We recommend

The components/ingredients of the radiator paint might separate if it is stored for a long time. Due to this, you have to use a stirrer to mix all the ingredients of the radiator paint. It also makes it easier for you to achieve an even colour. If you’re refurbishing a cast iron radiator before it’s installed into your home, make sure you have access to an outdoor area where there is a hose. If you don’t, then washing it down will be difficult and terribly messy. 4 steps for restoring a cast iron radiator Okay, so you’re not that daft and you’ve let your radiators cool. Then, you’ve gone at it with a duster, removing as much dirt and dust as possible, and given it a good wipe down with a damp cloth to ensure every last dab of dirt and grease smear is removed. And just to be absolutely certain, you’ve dried it well and given it a good rub down with some sandpaper. Over time, it can become difficult to determine if a radiator was once painted or if it has been left bare. Use a screwdriver to scrape the surface of the radiator in an inconspicuous area to confirm if the radiator has been previously painted. If it has, you should see flaking when you scrape the screwdriver over the surface.

Top tip: It may be worth using an anti-corrosive primer as this will prevent the rust from getting worse over time. If unsure, speak to a decorator who can advise you. You will need to use either a metal primer or specialist radiator primer first to ensure that any bare or rusted areas are protected, and to give a good base for subsequent coats to adhere to. Add white vinegar onto a cloth and rub it onto the chromework. Due to the acidic nature of the vinegar, it will eat into the rust and get rid of it. Dip your painting brush in the metal primer/ specialist radiator primer and apply it to the surface of the radiator. Move the brush from the top part of the radiator to the bottom part of the radiator as you move from one fin to another. Once you finish painting the fins and tubes, apply the metal primer paint on the two side edges of the radiator. Painting a radiator is easier than you probably thought, especially since there’s no need for a metal-specific primer—or any primer for that matter. If you’ve cleaned and sanded your radiator well, you can go straight to painting.Formulated to provide a heat-resistant brilliant white finish on radiators,Radiator Enamel prevents both yellowing and rust, and creates a tough, long-lasting finish. As it’s an aerosol, make sure ventilation is ample and, as there’s also a strong element of “spray ‘n’ pray”, ensure walls and floors are copiously covered in newspaper so that the fine mist of paint you’re generating doesn’t ruin your house and your day. This is because many radiators and heated towel rails are manufactured using mild steel and then finished with chrome plating over the top to give a shiny and protective finish. Over time, this chrome plating can develop rust spots on the surface. If the rust on a radiator is superficial, it may be possible to remove it by sanding it down and repainting it. If your radiator looks almost beyond saving, if the stains on it are themselves heavily stained and if it would look much more at home in a skip than in your home, you need Zinsser 123 Bulls Eye.